Item No. MS10716 Alpine Speedcut Radial Saw - Model SSA-17 Speedcut radial arm saw includes a turntable cutting system, (2) 10’ roller feed tables, length stop system Price: $6,900 Condition: Good Location: AL
Item No. MS10716 Alpine Speedcut Radial Saw - Model SSA-17 Speedcut radial arm saw includes a turntable cutting system, (2) 10’ roller feed tables, length stop system Price: $6,900 Condition: Good Location: AL
Item No. MS200641 Automated Spida Saw 2000 Spida Saw - Model CSS5456055. Features automated angle and length setup. Includes infeed, outfeed and computer equipment. Price: $19,500 Condition: Good Location: VA
Item No. MS200641 Automated Spida Saw 2000 Spida Saw - Model CSS5456055. Features automated angle and length setup. Includes infeed, outfeed and computer equipment. Price: $19,500 Condition: Good Location: VA
Item No. MS10286 DeWalt Radial Arm Saw • Model T1873GG • 7 1/2 HP Motor • 18" Blade • 208-220/440V 3 Phase • MFG Date: 1968 • Rewired and serviced with new bearings • Runs very well Price: $3,700 $2,200 Condition: Good + Location: SC
Item No. MS10286 DeWalt Radial Arm Saw • Model T1873GG • 7 1/2 HP Motor • 18" Blade • 208-220/440V 3 Phase • MFG Date: 1968 • Rewired and serviced with new bearings • Runs very well Price: $3,700 $2,200 Condition: Good + Location: SC
Item No. MS90456 TCT EZ Trimmer (Jack Beveler) Fast and Safe way to cut double bevels on jack chords and like pieces. The EZ-Trimmer is totally enclosed for maximum safety and has an average cycle time of 15 pieces per minute. Cut double bevels on pitches from 0/12 to 12/12 including 2X6 lumber and smaller. Features a 5 HP motor, and bevel edge, 3 wing carbide shaper cutters. Price: $7,900 Condition: Good - Location: FL
Item No. MS90456 TCT EZ Trimmer (Jack Beveler) Fast and Safe way to cut double bevels on jack chords and like pieces. The EZ-Trimmer is totally enclosed for maximum safety and has an average cycle time of 15 pieces per minute. Cut double bevels on pitches from 0/12 to 12/12 including 2X6 lumber and smaller. Features a 5 HP motor, and bevel edge, 3 wing carbide shaper cutters. Price: $7,900 Condition: Good - Location: FL
Item No. MS02961 Alpine PF 90 (Parts Only) • Includes Saw and Electronics Cabinet Price: $Make Offer$ Condition: Good Location: WA
Item No. MS02961 Alpine PF 90 (Parts Only) • Includes Saw and Electronics Cabinet Price: $Make Offer$ Condition: Good Location: WA
Item No. MS83171 2005 The Original Saw Co. - Radial Arm Saw - Model 3546 Perform straight cuts, bevel cuts, miter cuts and compound bevels, as well as swiveling to rip down panels. (Parts are easily sourced as this model saw is still currently in production.) • Radial Arm Saw • 16” Blade • 3 Phase 208V/240V/480V • Price: $5,900 Condition: Very Good Location: NC
Item No. MS83171 2005 The Original Saw Co. - Radial Arm Saw - Model 3546 Perform straight cuts, bevel cuts, miter cuts and compound bevels, as well as swiveling to rip down panels. (Parts are easily sourced as this model saw is still currently in production.) • Radial Arm Saw • 16” Blade • 3 Phase 208V/240V/480V • Price: $5,900 Condition: Very Good Location: NC
Item No. MS72974 Alpine Speedcut Express Model 651E. Speed Cut Express Automation System. Designed to automate both angle and length setups for cutting. Operates using data from a standard TRS file. Saw currently has electronic/software issues that need to be resolved on to make it operational. 480 Volt 3 phase Price: $21,900 Condition: Good Location: AR
Item No. MS72974 Alpine Speedcut Express Model 651E. Speed Cut Express Automation System. Designed to automate both angle and length setups for cutting. Operates using data from a standard TRS file. Saw currently has electronic/software issues that need to be resolved on to make it operational. 480 Volt 3 phase Price: $21,900 Condition: Good Location: AR
Item No. MS91282 Everett Industries -Straight Chop & Cuttoff Saw Straight Chop & Cutt-off Saw (Dry Abrasive) - Model 14-16 -14" or 16" Blade Diameter, 1" Arbor Hole. Purchase and assembled but never used (like new). 3 Phase Power. 7 1/2 HP motor, steel stand, “V” vise Fast Cutting of Hardened Tool Steel, Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod. Price: $2600.00 Condition: Excellent Location: MT
Item No. MS91282 Everett Industries -Straight Chop & Cuttoff Saw Straight Chop & Cutt-off Saw (Dry Abrasive) - Model 14-16 -14" or 16" Blade Diameter, 1" Arbor Hole. Purchase and assembled but never used (like new). 3 Phase Power. 7 1/2 HP motor, steel stand, “V” vise Fast Cutting of Hardened Tool Steel, Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod. Price: $2600.00 Condition: Excellent Location: MT
Item No. MS629106 2004 Virtek Laser MC Automated cutting and laser marking for wall plates. Features a Class IV laser for marking, a computer workstation w/ enclosure and a Vista Angle Boss saw (20" Blade) for cutting. Designed to optimize lumber usage, reduce waste, reduce labor and improve quality. Feed rate is an impressive 45" per second. 480V, 3ph power required for saw, 110 volt required for the PC and laser. 80 PSI air required. Left to Right feed - Handles material up to 20’. Price: $82,500 Condition: Very Good Location: PA
SOLD
Item No. MS629106 2004 Virtek Laser MC Automated cutting and laser marking for wall plates. Features a Class IV laser for marking, a computer workstation w/ enclosure and a Vista Angle Boss saw (20" Blade) for cutting. Designed to optimize lumber usage, reduce waste, reduce labor and improve quality. Feed rate is an impressive 45" per second. 480V, 3ph power required for saw, 110 volt required for the PC and laser. 80 PSI air required. Left to Right feed - Handles material up to 20’. Price: $82,500 Condition: Very Good Location: PA
SOLD
Item No. W02956 Vertical Panel Saws • (1) Safety Speed H4 Vertical Panel Saw 10′ frame, and 50″maximum crosscut • (1) Safety Speed C-Series Vertical Panel Saw 5′ frame and 50″ maximum crosscut. Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. W02956 Vertical Panel Saws • (1) Safety Speed H4 Vertical Panel Saw 10′ frame, and 50″maximum crosscut • (1) Safety Speed C-Series Vertical Panel Saw 5′ frame and 50″ maximum crosscut. Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. W02953 Wall Panel Saw With Tiger Stop • Pop-Up Whirlwind Saw • 16’ Programmable Tiger Stop • 18’ Infeed/15’ Outfeed • Shopnet Station Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. W02953 Wall Panel Saw With Tiger Stop • Pop-Up Whirlwind Saw • 16’ Programmable Tiger Stop • 18’ Infeed/15’ Outfeed • Shopnet Station Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. W02954 Spida Plate Marker With Chop Saw • 20’ Programmable Spida Plate Marker (2018) • 20’ Infeed/10’ Outfeed • DeWalt Chop Saw The Spida Rapid Stop Plate-Marker features automated length stop used for marking wall plates for part locations. Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. W02954 Spida Plate Marker With Chop Saw • 20’ Programmable Spida Plate Marker (2018) • 20’ Infeed/10’ Outfeed • DeWalt Chop Saw The Spida Rapid Stop Plate-Marker features automated length stop used for marking wall plates for part locations. Price: $Make Offer$ Condition: Good Location: FL
SOLD
Item No. MS92774 Apollo - MangoTech Radial Saw • Accurately cut any angle between 9°- 171° • 36” max crosscut at 90° • Quick angle changes Price: $12,900 $8,900 Condition: Good Location: FL
SOLD
Item No. MS92774 Apollo - MangoTech Radial Saw • Accurately cut any angle between 9°- 171° • 36” max crosscut at 90° • Quick angle changes Price: $12,900 $8,900 Condition: Good Location: FL
SOLD
Item No. MS10541 2018 HOLTEC Transcut II Station HOLTEC Transcut II Crosscut Station with 6M Fixed Frame Assembly and Electronic Length Measurement • 20' Fixed Frame Assembly • Automatic Chain Tensioner • Rack & Pinion Movement • Automatic Saw motor Shutoff • Electric Oil Lubrication Pump • HOLTEC parallel Guide Frame • Macrolon® Safety Shielding • Elevating and Galvanized Operator's Platform​ Price: $32,900 Condition: Excellent Location: NH
SOLD
Item No. MS10541 2018 HOLTEC Transcut II Station HOLTEC Transcut II Crosscut Station with 6M Fixed Frame Assembly and Electronic Length Measurement • 20' Fixed Frame Assembly • Automatic Chain Tensioner • Rack & Pinion Movement • Automatic Saw motor Shutoff • Electric Oil Lubrication Pump • HOLTEC parallel Guide Frame • Macrolon® Safety Shielding • Elevating and Galvanized Operator's Platform​ Price: $32,900 Condition: Excellent Location: NH
SOLD
Item No. MS03394 Alpine Speedcut Saw - Model 645 Speedcut radial arm saw includes a turntable cutting system, roller feed table, length stop Price: $4,500 Condition: Good Location: TN
SOLD
Item No. MS03394 Alpine Speedcut Saw - Model 645 Speedcut radial arm saw includes a turntable cutting system, roller feed table, length stop Price: $4,500 Condition: Good Location: TN
SOLD
[Ratings: Fair = 1-2, Good = 3-5, Very Good = 6-8, Excellent = 9-10]
© 2020 Truss Machinery Connections, Inc.
Phone: 800-580-6430
Fax: 800-580-6424
[Ratings: Fair = 1-2, Good = 3-5, Very Good = 6-8, Excellent = 9-10]
© 2020 Truss Machinery Connections, Inc.
Phone: 800-580-6430
Fax: 800-580-6424